Search This Blog

Wednesday, May 27, 2015

Time Signatures part 1 The Basics

         A time signature is an indicator of the rhythmic parameters of a piece of music. It consists of two numbers (one stacked on top of the other). Each number tells us something about the way the rhythms of the piece should be read and counted. The top number tells us how many beats are contained in each measure of the piece. The bottom number tells us which note receives the value of one beat in this piece of music.



          Time signatures are located in the beginning of a piece of music. The first symbol to the very left of the musical staff is the clef. This tells us which five lines are represented by the staff. To the right of the clef is the key signature. If the piece is written in the key of C major or A minor (no sharps or flats) then there will be no symbols indicated in the key signature. If the piece is written in any other key, the sharps or flats of that key will be indicated in the key signature. To the right of this (on the 1st musical staff) is where we find the time signature.




          The top number of a time signature can be any number. This means that we can have any number of beats per measure in a piece of music. However, since most music tends to follow symmetrical rhythmic patterns most simple pieces contain either two, three, or four beats per measure. The most common time signatures contain a four on the bottom; and either a two, three or four on top. When there is an eight on the bottom of the time signature, the most common top number is six. However, more complex musical pieces can contain diverse rhythmic patterns. In these cases, other (less common) numbers are used on the top of the time signature. These types of time signatures will be discussed in more detail in future lessons.


          The bottom number of a time signature can only be part of a sequence starting with 1 and continuing with the double of the number that precedes it. In other words, the numbers of this sequence are: 1, 2, 4, 8, 16, 32, 64, 128… and they continue on in this pattern. The reason for this specific sequence is the fact that each bottom number of a time signature corresponds to a note value (1 = whole note / 2 = half note / 4 = quarter note / 8 = eighth note / 16 = sixteenth note / 32 = thirty-second note …).


          One method I use to help my students realize the value of the bottom number of a time signature involves the visualization of fractions. I have them convert the time signature into a fraction. Next, we discard the top number since we are only concerned with the value of the bottom number at the moment. We replace the top number (or numerator) of this imaginary fraction with a 1. The fraction that results from this process represents the name of the rhythmic value that receives one beat in this time signature. A fraction of ½ corresponds to the half note; a fraction of ¼ corresponds to the quarter note and so on.










          In beginning music lessons most teachers tell their students that the quarter note receives one beat, the half note receives two beats, the whole note receives four beats and the eighth note receives half a beat. This information is correct if the bottom number of the time signature is a four. However, the actual beat values of each rhythm are not set throughout all musical examples. They change based on the bottom number of the time signature. What is set is the relative length of each rhythmic value in comparison with each other. A half note will always be half the value of a whole note. A quarter note will always be a quarter of the value of a whole note and half the value of a half note. Beginning music teachers tell the “white lie” of set rhythmic values because it is too difficult to explain the actual system of rhythmic values to a beginning music student (in most cases). Plus, most beginning music contains time signatures that have a four as the bottom number. Later on, when the student begins to experience time signatures with other numbers on the bottom, we explain the actual system of rhythmic values. In the video, I provide a chart that displays the rhythmic values of a whole, half, quarter and eighth note in time signatures that contain either a two, four or eight as the bottom number. This chart does not cover every rhythmic value under every type of time signature, but it displays enough values to illustrate the concept.


This Learning Music With Ray video discusses time signatures.  In it, I discuss the location of the time signature in a piece of music and the information it provides for the reader.  I point out the significance of the top and bottom numbers and explain the musical parameters covered by each number.  


Wednesday, May 20, 2015

Memorizing Scales

                A keysignature is a collection of seven pitches that a diatonic piece of music is composed of.  One could think of it as the pitch ingredients within the recipe of a song.  There are 21 total chromatic pitches in music.  This is a result of a seven letter musical alphabet in which each letter can be either sharp, flat or natural.  However, diatonic music selects seven of these 21 pitches as the pitch framework for a particular song.  Diatonic music is limited to one type of each letter in the musical alphabet. 



            The order in which sharps or flats are added to the list of the 7 pitches of a key signature is determined by a mathematical component of music called the circleof fifths.  The key of C major or A minor contains no sharps or flats, so this key signature acts as the starting point of the circle of fifths.  If we travel up a fifth from there (counting C or A as one) we reach the key that contain one sharp (G major or E minor).  Continuing up in fifths will reveal the tonic for two sharps, three and so on.  Traveling down a fifth from C or A will reveal the tonic of the key with one flat (F major or D minor).  Continuing down in fifths reveals the other flatted tonics.  This circle of fifths diagram graphically depicts the order of the cycle.  Major keys are listed in the outside circle and minor keys are listed in the inside one.  At the bottom of the circle, we reach a point where additional sharps or flats would be inefficient.  Once the number of flats or sharps in a key signature exceeds six the resulting key overlaps the opposite side of the circle.  For example, the key of C# major which contains 7 sharps is the enharmonic equivalent to Db major which contains only 5 flats.  For this reason, the circle of fifths diagram usually only depicts the simplest form of each key signature.  For a more in-depth discussion on the circle of fifths, please refer to my blog posts from 5/28/14 and 6/4/14




               A scale is a consecutive listing of the 7 pitches within a diatonic key.  In our previous lesson on key signatures, we discussed that a diatonic key is a selection of 7 of the 21 possible pitches in music.  The selection is limited to 7 because each letter in a diatonic key is limited to one type (either flat, natural or sharp).  The listing of pitches within a scale always starts and ends with the tonic pitch.  The purpose for practicing scales on our instrument is to familiarize ourselves with the 7 diatonic pitches of a given key.
                Music students often learn their scales by reading them off of a piece of sheet music.  To memorize the scales, they practice repeatedly until the movements required to perform the scale are committed to muscle memory.  This method of memorization can be unreliable since it does not employ a cognitive understanding of the pitches in the sequence.  This lack of cognition also robs the student of the true benefit of practicing scales, which is familiarizing ourselves with each key signature.  Once we can mentally distinguish the pitches of a particular key signature, we can free ourselves to play a musical passage without accidentally hitting pitches outside of the key.
                If we visualize the 21 pitches of music, we can practice picking out and naming the 7 consecutive pitches of a scale.  We start by naming the 7 letters of that scale, beginning with the tonic letter (name of the key or scale) and looping around the 7 letters.  This is something that can easily be memorized since it is the first 7 letters of the English alphabet.  Then we simply apply the key signature (derived from the circle of fifths) of that scale while naming the letters.  We practice naming and then playing each pitch of the scale while keeping a steady beat.  Gradually, we increase the tempo and decrease the delay between naming and playing the pitches (eventually this requires naming the pitches in our head instead of out loud).  Finally we reach a point where we can name and play the pitches almost simultaneously, and at a decent tempo.  This method provides the confidence of cognitive pitch recognition as opposed to mere muscle memory reliance. 
                This Learning Music With Ray video discusses the method I use to help my students memorize their scales.  The primary reason for the study of scales is to develop an understanding of key signatures.  Truly knowing a scale frees musicians to mentally contain themselves within the confines of a given key.    In this video, I use the circle of fifths and a display of the 21 chromatic pitches to practice visualizing the seven pitches of a particular scale.  I demonstrate a process of naming and playing each pitch that ensures cognitive recognition of each pitch in the scale. 


Wednesday, May 13, 2015

Gospel Piano (part 4) Song Arrangement

                The chords used to create the harmony for gospel songs usually change every two or four beats (sometimes they are held even longer).  The frequency of the chord changes within a song is referred to as the harmonic rhythm.  Occasionally, there are passages that contain a chord change on every beat, but these are brief moments in the songs.  Few songs contain that fast of a harmonic rhythm throughout their entire chord structure. 
                This usual harmonic rhythm of change every 2 to 4 beats creates gaps in the music where nothing is happening.  Guitar players often fill in these gaps with rhythmic strumming patterns.  Piano players, however, cannot strum their instrument.  We need to use other techniques to fill in the empty space in the music.  We can strike the keys in a repeating pattern (similar to strumming), but this often results in a playing style that is simple, predictable and musically boring.  The music is taken to another level when we create an arrangement that includes a variety of techniques crafted together.
                Before creating a piano song arrangement, we must consider the context that the arrangement will be used in.  When playing with a band, it is often desirable to leave open gaps in the arrangement and not fill up each moment.  This leaves space for the other instruments to play.  If everyone in the band is filling every gap with their own full arrangement, they will be playing on top of each other and the music will sound cluttered.  Instead, each musician should take turns filling in the gaps while the others leave room.  Even when we are just accompanying a singer on the piano, we need to be sensitive to what the singer is doing.  We should leave open space when the singer is performing a complex melodic passage (or adding a run).  Then we can fill in the moments where the singer leaves open space.  We may even choose to leave the space open if the mood calls for that kind of playing. 
                When playing by ourselves, piano players can take the liberty to fill in more of the empty space.  We should still be sensitive to what is going on in the music and the flow of the performance, though.  Most songs (like all forms of entertainment) follow a natural progression of development.  They usually start off simple and pure.  Then things begin to develop and grow as the song progresses.  Finally, we reach a climax (the biggest part of the song) which is followed by a resolution.  We should keep the overall shape of this musical arch in mind when creating a song arrangement.  A simpler arrangement in the first verse, followed by increasing complexity will help to accent the development of the song.    
                Melodies are the most powerful and memorable tool available to a musician.  Some songs throughout history contain instrumental melodic introductions or run that are even more identifiable and memorable than the chorus (people hear that line and automatically know what song it is).  As we mentioned last time, there are times when a gospel piano player breaks away from the chords of the song in order to play melodic fills and runs.  These lines are often played in octaves or split octaves.  In our musical example there is an octave run that leads into the bridge.  Then there is a split octave run on the third line of the bridge.  These runs help to emphasize main lines in the melody, or lead to new parts of the song.
                In addition to this, short melodies can also be used to fill in the distance traveled from chord to chord.  These melodies are often played in the right hand, but they can also exist in the left.  An interchange between hands can create interesting patterns that add presence and variety. 
                Another technique often used to fill out an arrangement is the use of multiple inversions of the same chord.  This allows the hands to travel up and down the piano covering a greater distance.  These chord inversions can be arpeggiated, or played in block formats.  The motion between inversions can also be filled in with melodic ideas. 
                There are many left hand techniques that can be used to fill out an arrangement.  Some of these include a walking bass line, stride patterns, octave displacement and arpeggios.  Some of these techniques are typical of particular styles and tempos of song, and do not necessarily fit in the style of our example song.  They will be demonstrated in future lessons.  This song lends itself to higher register left hand voicings that are complimented with octave displacement (repeating the bass of the chord an octave or two lower).  When the root of the chord is in the bottom of the voicing, we can play the fifth followed by the root an octave lower.  When the third is in the bottom of the voicing, we can play the root followed by the third an octave lower.  This downward left hand movement can be contrasted by either static left hand voicings, or arpeggios traveling up.

                There are also additional right hand techniques that do not necessarily lend themselves to the style of this musical example.  No song compliments every type of embellishment technique.  Instead, these different techniques often help to accentuate the individual style of the song.  Future examples will highlight other styles and embellishment techniques.
                This Learning Music With Ray video discusses the use of melodic motifs, left hand motion and other techniques to create song arrangements.  These techniques help to fill in the gaps of empty space between our chord voicings.  In it, I continue with our study of the original song He Makes All Things New.  I play through each section of the song using my example of a musical arrangement.  I also provide a detailed breakdown of each section of the song, explaining how it was derived from the chord voicings and what techniques were used to fill in the gaps.  


Wednesday, April 29, 2015

Gospel Piano (part 3) Chord Voicings

                When voicing chords for gospel piano playing, we have the option of packing the pitches close together or spreading them out in an open voicing.  My former lesson on Close and Open Chord Voicings covered this topic with more simple harmonies.  In gospel music, the harmonies tend to include more color tones.  Traveling gradually from open to close voicings (or from close to open) across a musical line creates a nice effect of contrary motion (parts moving in opposite directions). 
                Most gospel piano chord voicings include two or three pitches in the left hand.  When constructing chord voicings that include the root, it is usually placed on the bottom of the voicing (unless otherwise indicated by the chord symbol).  This leaved one other pitch available for a two pitch left hand voicing.  Which pitch we select depends on what register of the piano or left hand is located in and how open or close the overall voicing is.  A third above the root may sound ok in higher registers, but down low on the piano this interval sounds muddy.  Also, this close of a left hand voicing suggests an overall voicing that is close (which doesn’t sound as good in low registers – also muddy).  So, lower left hand positions lend themselves to other intervals above the root.
                The other intervals available in two pitch left hand voicings are the 5th, 7th, 9th and 10th.  Most people can’t reach past the 10th.  The octave is also available, but it sound kind of hollow and ends up doubling the pitch that is already being played by the bass guitar (when playing without a bass guitar this can be used to strengthen the bass line).  These other intervals sound good in most registers of the piano.  However, larger intervals leave less room for the right hand pitches, so they tend to occur more often in lower registers with open voicings.  Fifths work in most situations (low or high).  In high registers they help to create beautiful close voicings.  In low registers they can be used to create a majestic sounding voicing (since herald trumpet playing was based off of open fifths).
                The right hand usual supplies the other pitches of the chord.  In gospel piano, pitches are often doubled to create thick and full texture.  This is opposed to jazz style voicings which tend to avoid doubling in order to stay clean and open sounding.  However, the desired texture is also dependent on the feel of the specific song (or even the moment).  For example, this is a gospel song, but its slow and clean style lends itself to less dense voicings. 
                Capitalizing on common tones is another practice of gospel and jazz musicians.  There will often be one or more pitches that are shared between two adjacent chords.  Maintaining the voicing of these pitches while changing the other pitches usually results in smooth voice leading.
                The chorus is usually the most memorable part of the song.  Sketching the melody of the chorus in our chord voicings can help to emphasize its importance.  Since we are only hitting chords during each chord change (and not every syllable of the melody) we cannot play a complete version of the melody in our chords.  However, we can try to place the melody pitch on the top of our most of our voicings in the chorus to hint at a duplication of the melodic line. 

                Finally, there are times when a gospel piano player breaks away from the chords of the song in order to play melodic fills and runs.  These lines are often played in octaves or split octaves.  In our musical example there is an octave run that leads into the bridge.  Then there is a split octave run on the third line of the bridge.  These runs help to emphasize main lines in the melody, or lead to new parts of the song.
                This Learning Music With Ray video discusses the use of chord voicings typical in gospel piano playing.  In it, I continue with our study of the original song He Makes All Things New.  I play through each section of the song voicing the chords musically (as opposed to using block chords).  I also provide a detailed breakdown of each chord voicing, explaining how they are structured and why they were selected for that musical situation.  I highlight the strategies of contrary motion, common tones, melody sketching and octave runs.


Wednesday, April 22, 2015

Gospel Piano (part 2) Diatonic Seventh Chords and Upper Extensions:

                Gospel music is composed of various chord progressions that are strung together.  Last week’s lesson discussed how diatonic triads can be used to create these chord progressions.  This week we will extend our musical palette to the use of diatonic sevenths chords and their upper extensions (or color tones when added to triads without a seventh).  
                The diatonic seventh chords in major and minor keys were already discussed in my Chord Progressions lesson.  That discussion was based off of a classical musical perspective.  As we mentioned last week, diatonic triads are viewed through a slightly different perspective in gospel music.  However, this is not true with seventh chords.  Since seventh chords contain four pitches, and they can contain more when upper extensions are added, they are more complex harmonic structures.  The addition of one pitch can change the identity of a chord.  I give several examples of this in the video.  One is the fact that a Cmaj9 chord can be seen as an Em7 once the pitch “C” is omitted.  For this reason, the typical chord substitutions that are used in gospel diatonic triads are not seen as such a standard when dealing with seventh chords.  Beside this difference, the same number system is used, identifying each chord with its corresponding bass note. 




                The 9th is the most common upper extension added to major and minor seventh chords.  It adds beauty and depth to the chord.  You may also choose to omit the seventh from some of the chords (leaving them in a triad state).  This is most common with triads in 1st inversion (when the 3rd is in the bass).  A common way to enhance triads in gospel piano playing is to add the 2nd to the chord.  In this case, the pitch is viewed as a 2nd instead of a 9th due to the fact that the 7th is not present.  Using the label “9th” implies that the 7th is present in the chord, making it unnecessary to include this number in the chord name.  I give a thorough lesson on all of this information in my Chord Color Tones lesson.   
                The dominant seventh chord is able to be ornamented with the greatest variety of upper extensions.  This is due to the dissonant nature of the chord which comes out of the fact that the 3rd and 7th form an interval of a tritone.  Often in gospel music, the flatted 13th, raised 9th and other altered upper extensions are added to this chord.  However, the musical example in this lesson lends itself to more consonant forms of the dominant seventh chord.    

                The best way to acquaint yourself with common chord progressions is to listen to the progressions used in the music on your playlists.  Listen first to the bass line and use it to determine the roots of the chords.  Then listen for the upper tones to establish the quality of the chords.  In addition, experiment on either a guitar or piano forming various chord progressions.  Listen to the character of each progression and the relationships between the different chords.  Expand your knowledge by developing strategies for connecting progressions.  These strategies can be used to determine the chord changes of any gospel song that you are trying to learn to play.  Most of these songs will contain seventh chords, upper extensions, substitutions and other advanced techniques.  We will cover all of these techniques in future videos.  However, any song can be boiled down to a simplified form using only triads (as demonstrated by the example song in the video).  This is the 1st step for entering the beginning stages of gospel piano playing.
                This Learning Music With Ray video discusses the diatonic seventh chords use in gospel piano playing.  It is a study in the typical harmonic patterns used when traveling from one chord to the next in gospel music.  I provide a detailed illustration of the diatonic seventh chords, found in both major and minor keys, from both a classical and gospel perspective.  I also discuss the color tones and upper extensions that can be added to these seventh chords.  Finally, I provide an example of an original gospel song written out in both plain seventh chords and also seventh chords with upper extensions.  I give a chord by chord analysis of the song and demonstrate how the diatonic seventh chords discussed earlier in the lesson can be applied to the performance of the song.  


Wednesday, April 15, 2015

Gospel Piano (part 1) Diatonic Triads:

                Gospel music is composed of various chord progressions that are strung together.  A chord progression is a group of chords that travel or progress through a harmonic sequence.  A progression can vary in size from two to seven or more chords.  They can be either diatonic or chromatic.  There are no set rules for chord progressions, although there are some sequences which tend to occur frequently.  
                The diatonic triads in major and minor keys were already discussed in my Chord Progressions lesson.  That discussion was based off of a classical musical perspective.  


In gospel music, these chords are viewed through a slightly different perspective.  A number system is used, identifying each chord with its corresponding bass note.  At some points within the number system, multiple chords could be used against the same bass note.  For example, the 2 chord can be the typical classical 2 chord (in a Major Key this is a minor triad, in a Minor Key this is a diminished triad) or it could be a V chord in 2nd inversion (with the 5th of the chord in the bass).  The most common of these substitutions is found on the 3 and 7 chords.  The most frequent 3 chord substitution in gospel music is playing a tonic triad in 1st inversion (with the 3rd of the chord in the bass).  The most frequent 7 chord substitution is playing the dominant in 1st inversion (with the 3rd of the chord in the bass).  These changes were applied to the gospel version of the diatonic triads displayed in this video, but other substitutions are also discussed in the lesson.  







                Within the larger scheme of harmonic movement, all songs end on the tonic harmony.  This final cadence is usually achieved by a dominant chord that resolves to the tonic.  The dominant chord is usually approached by either a two or four chord.  Subdominant or supertonic harmony can be approached either directly from the tonic, or by the use of the seven, three or six chords.  This type of large scale harmonic motion corresponds to the names given to each diatonic chord (as listed in the previous paragraph).  An outline of this large scale harmonic typical harmonic motion is provided in the video.


               Small scale harmonic progressions can take on any form.  There are many fragmented chord progression that can precede the main cadence of a piece of music.  This allows for an extensive amount of usable chord progressions. 

                The best way to acquaint yourself with common chord progressions is to listen to the progressions used in the music on your playlists.  Listen first to the bass line and use it to determine the roots of the chords.  Then listen for the upper tones to establish the quality of the chords.  In addition, experiment on either a guitar or piano forming various chord progressions.  Listen to the character of each progression and the relationships between the different chords.  Expand your knowledge by developing strategies for connecting progressions.  
               These strategies can be used to determine the chord changes of any gospel song that you are trying to learn to play.  Most of these songs will contain seventh chords, upper extensions, substitutions and other advanced techniques.  We will cover all of these techniques in future videos.  However, any song can be boiled down to a simplified form using only triads (as demonstrated by the example song in the video).  This is the 1st step for entering the beginning stages of gospel piano playing.
                This Learning Music With Ray video discusses the diatonic triads use in gospel piano playing.  It is a study in the typical harmonic patterns used when traveling from one chord to the next in gospel music.  I provide a detailed illustration of the diatonic triads, found in both major and minor keys, from both a classical and gospel perspective.  I discuss the large scale harmonic motion that is found in most pieces of music.  Finally, I provide an example of an original gospel song written out in a simplified form containing only triads.  I give a chord by chord analysis of the song and demonstrate how the diatonic triads discussed earlier in the lesson can be applied to the performance of the song.  


Thursday, April 9, 2015

Slow Worship Piano Techniques (using the add 9 or add 2)


          When playing slow worship songs, many piano players voice simple triads in their right hand while playing the root (or a root – fifth – root arpeggios) in their left hand. One device that can automatically add color to a simple triad is adding the 2nd to the chord voicing. This color tone sound good on both major and minor triads. In the style of playing described above (chord in right hand and arpeggio in left hand) we can simply add this tone to the right hand chord voicing.

          Some situations also lend themselves to playing seventh chord instead of triads. Since the root is often played in the left hand (or by the bass player in the band), it can be left out of our right hand chord voicings. By moving this pitch down a half step we can turn a major triad into a major seventh chord. Moving the root down a whole step will transform a major triad into a dominant seventh chord, and a minor triad into a minor seventh chord. This substitution of the seventh for the root along with the addition of the ninth (called 9 instead of 2 because the 7th is present in the chord) makes for an even richer voicing.

          The add 2 (or add 9) can also be incorporated in our left hand playing. Our left hand arpeggio of root – 5th – root can extend one more pitch up to the 2nd (or 9th) for added color. We can also use the 2nd to lead further up to the 3rd of the chord as the final pitch of the arpeggio. Finally, we can add the 7th into this mix of pitches to add even more interest to out left hand arpeggios. Any combination of these pitches can be assembled to create left hand arpeggio patterns that fit within the timeframe of the given chords. Finally, left hand movement can be combined (in an alternating fashion) with right hand movement (using the given chord and color tones) to create even more elaborate and expressive patterns.

          These patterns can be practice both in specific chord exercises (like running through the cycle of 5th’s) or by applying them directly to worship songs (both practice techniques are shown in the video). We should start by applying one pattern at a time to the exercise or song until it is mastered. Later on, we can try alternating between two or more patterns. Finally, we can create a song arrangement by establishing a pallet of patterns and planning which one will be applied to each chord. This type of variety also adds to the musicality of our playing.

          When playing with a band, a piano player should always take care to avoid playing left hand pitches that conflict with the bass player’s part. We often use rootless chord voicing in these situations to avoid competing with the roots being played by the bass. However, in slow worship, this style of left hand arpeggios helps to fill in the empty space created by hanging on a chord for several slow beats. In some cases, this fits well with the bass part (depending on what style or pattern that musician is playing). It is also a great style for solo piano worship playing (like playing alone during an alter call or during other quiet parts of the service).

          This Learning Music With Ray video discusses the use of the add 2 (or add 9) color tone when playing slow worship songs on the piano. In it, I explain how the add 2 (or add 9) can be used in the right hand to add color to your chord voicings. I also explain how this pitch can be added to the material played in the left hand. I demonstrate several versions of left and right hand patterns, and discuss how we can alternate between these patterns when creating an arrangement. I demonstrate the application of these patterns to both a cycle of 5th’s chord exercise and the performance of a worship song.